Description:NMZ series are horizontal, single stage, axially split case, double suction, between bearing, centrifugal pumps. It’s suitable for pumping clean water or slightly contaminated water or li...
Description:GE series horizontal end suction centrifugal pumps are over hung pumps and designed according to EN733/DIN24255 standard, mainly be applied for clean water or liquid with less solids, wit...
Description:OH are single stage, single suction pumps with overhung non clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is suppl...
COT series horizontal easy-dismounting centrifugal electric pumps are designed in easy dismounting way to reduce the maintenance cost. The pump shaft and motor shaft are separated and assembled by coupling. Without any crane equipment, no mater how big the motor power is, one and only one person can replace the motor bearing and mechanical seal within 20 minutes.
50Hz |
|
60Hz |
50 to 300mm |
Diameter |
2 to 12 in |
8 to 1600 m³/h |
Capacities |
35 to 7044 USgpm |
Up to 125m |
Heads |
Up to 410 ft |
Up to 1.6 MPa |
Pressures |
Up to 232 psi |
Up to 120° C |
Temperatures |
Up to 248 ° F |
Water transport
Water supply and distribution
Irrigation, drainage and flood control
District cooling/heating
Fire fighting
Hot water recirculating
Pump Part |
Material Configuration |
||||||||
Cast Iron |
Ductile Iron |
Carbon Steel |
SS 304 |
SS 316L |
Duplex |
Super Duplex |
|||
Casing |
Cast Iron |
Ductile Iron |
Carbon Steel |
SS304 |
SS316 |
Duplex |
Super Duplex |
||
impeller |
Cast Iron |
Ductile Iron |
Carbon Steel |
SS304 |
SS316 |
Duplex |
Super Duplex |
||
Shaft |
SS 420 |
SS304 |
Duplex |
Super duplex |
|||||
Seal housing |
Cast Iron |
Ductile Iron |
Carbon Steel |
SS304 |
SS316 |
Duplex |
Super Duplex |
we will contact you within 24 hours.