Croos Pump (Shanghai) Co., Ltd.

GE Type End Suction Pump

end suction pump
GE End Suction Centrifugal Pump is used for pumping clean water or liquids which chemical and physical property is similar to water.

For the pumps in same model, the performance can be changed by cutting the outer diameter of impeller(which indicated as the latter A, B or C at the end of the model name).

GE pump is simple in structure, reliable in performance, small in size, light in weight, high lift in suction, low consumption in power and easy in maintenance.

For all 60 models, it only have shaft in 4 sizes, bracket in 5 types. For the same model, the shafts, shaft sleeves, shaft seals, bearings and the fasteners of impeller can be interchangeable.

croos end suction pump

CONSTRUCTION

Constructed to BS EN733/DIN 24255 standard

Back-pull-out design allows disassembling the complete pump rotor, including the bearing bracket without removing the pipes.

Mounting frame is supplied with two ball bearings, lubricated by grease or oil.
croos pump manufacturer

50Hz


60Hz

32 to 200mm

Pump sizes

1.3 to 8 in

4.5 to 1,080m³/h

Capacities

19.8 to 4,755 USgpm

Up to 100m

Heads

Up to 328 ft

Up to 1.6MPa

Pressures

Up to 232 psi

Up to 105° C

Temperatures

Up to 221 ° F


CROOS PUMP (SHANGHAI) CO.,LTD.

NO.518, ZIXU ROAD, SHANGHAI, MINHANG, CHINA

TEL: 86-21-64092786

EMAIL: export@croospump.com

Website: www.croospump.com


Related Articles
  • TEL:+86-21-64092786
  • EMAIL:export@croospump.com
  • ADDRESS:No.518 Zi Xu Road,Minhang District ShangHai,China