The vertical centrifugal pump has the following seven characteristics:
The first characteristic of vertical centrifugal pump:
Vertical centrifugal pump is a vertical structure which is the same diameter and is located on the same Central Line. It can be installed in the pipeline as well as the valve. It has a compact appearance, small footprint and low construction investment.
The second characteristic of vertical centrifugal pump:
The impeller of the pump is directly mounted on the extension shaft of the motor, the axial size is short, the structure is compact, and the water pump and motor bearing are properly configured. The radial and axial load of the pump can be operated effectively, thus ensuring the operation of the pump is stable, without vibration and low noise.
The third characteristic of vertical centrifugal pump:
Its shaft seal is sealed by mechanical seal or mechanical seal. It adopts imported titanium alloy seal ring and medium high temperature mechanical seal, and it uses hard alloy material, wear-resisting seal, it can effectively extend the service life of mechanical seal.
The forth characteristic of vertical centrifugal pump:
It is convenient to install and overhaul the plumbing system. The design of hydraulic model is advanced, it has high efficiency and high energy saving.
The fifth characteristics of vertical centrifugal pump:
The internal impeller, pump shell and its main fittings are made of stainless steel stamping. Its flow is particularly smooth, its bearing shell and axle sleeve are hard alloy, it has super life and can prevent secondary pollution.
The sixth characteristic of vertical centrifugal pump:
The vertical centrifugal pump can carry clear water and physical chemical properties similar to clear water.
It is suitable for industrial and urban water supply and drainage, high rise building pressurized water delivery, garden sprinkler irrigation, fire pressure, long-distance transport, hvac refrigeration cycle. The bathroom and other cold water circulating pressurization and equipment, its temperature should be less than 80 degrees Celsius.
The seventh characteristic of vertical centrifugal pump:
The main control parameters selected by the vertical centrifugal pump are the flow rate of the pump, the lift H, the efficiency eta, the power, the speed n, the working pressure, the necessary cavitation allowance (NPSH), etc. The flow and lift of vertical centrifugal pump are very large. It can be installed in dry places or submerged in water.